Description
Ranked #1 in the Elite Penetrating sealer range
Suitable for Porous and Hard Surfaces
Elite Shield is a water-based penetrating sealer utilizing state of the art fluorinated technology, designed for use on natural stone including granite, marble, bluestone,
sandstone, limestone, travertine, terracotta, and slate.
Elite-Shield can also be used on concrete, grout, and pavers. It provides an invisible natural look,
whilst providing maximum surface protection against water, red wine, and oil based contaminants.
FEATURES AND BENEFITS
• Water based, non flammable
• Fast Curing
• Can be used indoors and outdoors
• Protects the surface from water damage and staining.
• Provides superior stain resistance properties against contaminants such as oil, grease, tea,
coffee and wine.
• Does not alter the coefficient of friction or slip factor.
• Assists in eliminating the occurrence of efflorescence.
• Reduces Moss, mould and algae growth.
• Reduces corrosion attack on steel reinforcing.
• Retains a natural look.
• Breathable, allows water vapour to escape.
• Deep penetrating.
• Alkali resistant
• Salt barrier, ideal around saltwater pools or marinas.
• Elite-Shield will last up to 15 years dependent on application and weather conditions and quality and abuse of the surface.
• No odour
• Non film-forming, will not flake or peel
2 coat application
COVERAGE
8-12m2 per litre per coat for porous stone and 10 – 14m2 per litre per coat on dense surfaces.
Contact us for the amount required.
APPLICATION OF WATERBASED ELITE-SHIELD
- The temperature of the Tile, Block, Paver or Concrete should be between 12c in sunlight and not drop below and up to 29 Degrees Celsius.
- Protect any adjacent areas by masking to avoid splashes or overspray onto surfaces not intended to be treated.
- Surface to be treated should be clean but can be damp.
- Apply sealer liberally by spray, lambswool applicator, roller or brush.
- Flood coat the surface to achieve a “wet” look appearance. It is best to agitate the
product into slightly denser surfaces. - Leave for 5-20 minutes then reapply a second coat whilst still wet.
- A second coat can be applied before or after first coat is dry.
- Do not allow the product to pool on the surface. wipe or buff excess sealer off the surface with a clean dry cloth or floor pad.
- Wipe off any excess sealer on top with a clean cloth after 10 mins.
- Allow to dry, water repellency will be evident immediately the surface appears dry, full curing will take 24 hours.
- Wash equipment in water as soon as finished.
