Description
Elite Guard Penetrating Sealer for Porous Stone
ELITE GUARD offers water and stain protection.
- Suitable for porous tiles or pavers only.
- Clear Natural Look.
- Waterbased Low voc and no toxic fumes.
- Fast application with coats 5-20min apart.
- Ideal for around pool areas..
ELITE GUARD
- Can be applied while stone is still damp after cleaning.
- Guards Concrete, Terracotta, Pavers, Sandstone, Limestone, Bluestone, Travertine, Pool areas and other natural rock against water damage and staining.
- Enables easier removal of dirt, grease, chewing gum, wine, coffee.
- Eliminates the occurrence of Efflorescence.
- Reduces Moss, mould and algae growth.
- Reduces corrosion attack on steel reinforcing.
- Does not alter the coefficient of friction or slip factor.
- Retains a natural look.
- Breathable, allows water vapor to escape.
- Deep penetrating.
- Food Safe
- Alkali resistant
- Salt barrier, suitable for around pools or marinas.
- Penetrating Sealer will last up to 10 years or longer dependent on application, weather conditions and abuse of the surface.
- 2 coat application
Coverage – 7 sq metres for coat 1 / 12 sq.metres for coat 2 on porous stone.
APPLICATION OF WATERBASED ELITE-GUARD
- The temperature of the Tile, Paver or Concrete should be between 12c in sunlight and not drop below and up to 29 Degrees Celsius.
- Protect any adjacent areas by masking to avoid splashes or overspray onto surfaces not intended to be treated.
- Surface to be treated should be clean but can be damp.
- Apply sealer liberally by spray, lambswool applicator, roller or brush.
- Leave for 5-20 minutes then reapply a second coat whilst still wet.
- Wipe off excess sealer on top with a clean cloth after 10 mins.
- Allow to dry, water repellency will be evident immediately the surface appears dry, full curing will take 24 hours.
- Wash equipment in water as soon as finished.
In all applications wiping off any excess sealer on top of the surface is required.
